- OSH in general
- OSH Management and organisation
- Prevention and control strategies
- Dangerous substances (chemical and biological)
- Biological agents
- Carcinogenic, mutagenic, reprotoxic (CMR) substances
- Chemical agents
- Dust and aerosols
- Endocrine Disrupting Chemicals
- Indoor air quality
- Irritants and allergens
- Occupational exposure limit values
- Packaging and labeling
- Process-generated contaminants
- Risk management for dangerous substances
- Vulnerable groups
- Physical agents
- Psychosocial issues
- Sectors and occupations
- Groups at risk
Irritants – in this article to be understood as being chemical irritants – are substances that may cause injuries to the skin, the eyes or the airways after a single exposure. These injuries may range from small, initially invisible injuries after exposure to weak irritants up to chemical burns after exposure to very strong irritants (i.e. corrosive substances). Prolonged or repeated exposure to weak irritants or a single exposure to stronger irritants may result in lasting health effects such as (irritative) eczema or asthma. Irritants are present in very many sectors and occupations. Irritants and the products containing them may be identified by means of their classification and labelling as well as by using various existing lists. Prevention should include combinations of measures at source, technical and organisational measures, personal protection and hygiene, and early warning.
Irritants are substances that may cause injuries to the skin, the eyes or airways after a single exposure. These injuries may range from small, initially invisible injuries after exposure to weak irritants up to chemical burns after exposure to very strong irritants (i.e. corrosive substances). In most cases, no lasting health effects will occur after exposure to weak irritants if the exposure is restricted to a single event. However, prolonged or repeated exposure to even weak irritants may result in lasting health effects such as (irritant) eczema or asthma. Irritants are omnipresent in many sectors and occupations. Well-known examples of irritants are:
- soaps or detergents in cleaning products
- wood dust
- welding fume
Even water should be regarded as a weak irritant. Prolonged or frequent contact of the skin with water may cause contact dermatitis (eczema).
The health effects that irritants cause may force workers to leave their profession. Irritants may also aggravate pre-existing complaints. The workers’ skin as well as the airways and eyes may be affected.
Effects to the skin
Initial acute effects of irritants to the skin may include a prickling sense or rashes (redness). The most significant lasting dermal health effect of irritants is contact dermatitis – also called ‘eczema’. This is an inflammation of the skin which may result in rashes, itch or pain, nodules, vesicles (blisters), scaling, thickened skin and in severe cases fissures. Relatively strong irritants may cause acute irritant contact dermatitis after a single or only a few subsequent exposures. Weak irritants, including water (‘wet work’), may cause a chronic cumulative contact dermatitis when the skin is not allowed sufficient time for recovery from the successive series of small injuries (Fig. 1).
Generally, the symptoms of irritant contact dermatitis are quite similar to those of allergic contact dermatitis, which is caused by occupational allergens. Treatment of contact dermatitis is difficult, which is why it often develops into a chronic skin condition. Eczema may make workers feel insecure and limit social interactions, as well as the performance of manual tasks.
Effects to the airways
Acute effects of irritants to the airways may include a prickling nose or throat, and cough. Irritants may also cause odour nuisance, but not all odorous substances are irritants. However, asthma patients sometimes report that certain odours, even in the smallest amounts, may trigger an attack. The most significant lasting effect of irritants to the airways includes occupational asthma, chronic obstructive pulmonary disease (COPD), rhinitis and toxic lung edema.
Asthma is a disease of the airways, leading to periodic narrowing of the airways, and to an increased sensitivity to all kinds of non-specific stimuli.
Symptoms of asthma include difficulty in breathing, tightness of chest and cough. Asthma is a serious disease that may be life-threatening. Asthma may be related to work in two ways:
- pre-existing asthma that is aggravated by exposures at the workplace, such as irritants or other stimuli;
- ‘true’ occupational asthma: asthma that is caused by exposures at the workplace.
In most cases, occupational asthma is caused by allergens. However, single or repeated high exposures to strongly irritating substances (e.g. chlorine, ammonium) may cause a specific type of asthma called reactive airways dysfunction syndrome (RADS).
COPD (Chronic Obstructive Pulmonary Disease) refers to two diseases: chronic bronchitis (an inflammation) and emphysema, the latter involving a reduction of the elasticity of the lung tissue. Both conditions result in chronic cough and shortness of breath which are irreversible, and eventually disabling. The major cause of COPD is smoking (including passive smoking), but other irritants may be the cause as well, or may aggravate the complaints. The WHO has estimated that COPD as a single cause of death shares 4th and 5th places with HIV/AIDS (after coronary heart disease, cerebrovascular disease and acute respiratory infection). Furthermore, the WHO estimates that in 2000, 2.74 million people died of COPD worldwide.
Rhinitis is an inflammation of the nose, which may be caused by irritants. Rhinitis often precedes the development of allergic asthma, e.g. in farmers.
Toxic lung edema is an accumulation of fluid in the lungs.It leads to impaired gas exchange and may cause respiratory failure. Lung edema may be caused by poorly water-soluble irritants such as mineral oil mists (e.g. cutting fluids). This illness may be acutely life-threatening.
Effects to the eyes
Exposure of the eyes to irritants may cause irritation (redness, pain) and in more severe cases conjunctivitis (‘pink eye’); an inflammation of the clear membrane covering the white part of the eye and interior lining of the eyelids.
Several thousands of irritants are known. Practically everybody gets into contact with irritants, either at work or at home, e.g. as a result of using cleaning products or cosmetics. Exposure to irritants may occur in very many sectors and in many different occupations. Some major professions at risk are indicated in tables 1 & 2. Table 1: Professions at risk of skin effects (contact dermatitis caused by irritants
The employer should describe potential risks caused by irritants in the obligatory risk assessment. First of all, irritants have to be recognised. Subsequently, risk assessment tools and monitoring may be applied.
Irritants at the workplace may be recognised by means of their classification and labelling or, if that is not applicable, by means of available lists of irritants.
Table 3 provides the hazard symbols and risk phrases (R-phrases) or hazard-statements (H-statements) by which irritants may be recognised on the labels or in the safety data sheets (SDS) of substances or products.
In addition to the label and SDS it may be convenient to consult one or more existing lists of irritants at the workplace. These include substances that may be generated in certain processes instead of being purchased, such as welding fume, diesel motor exhaust, wood dust and glass wool fibres. Such lists can be found for example in publications of EU-OSHA and at the skin at work website of HSE.
Risk assessment tools and monitoring
As soon as the potential irritants at the workplace have been identified one may proceed with exposure assessment and risk assessment using one of the available risk assessment tools. Well-known risk assessment tools include for example COSHH-Essentials in the UK, the German EMKG and Stoffenmanager (Dutch and English versions). These have been described in the articles on risk management tools and/or monitoring at the workplace.
In case of exposure by inhalation, the exposure may be assessed against an available Occupational Exposure Limit (OEL). In order to establish the appropriate OEL, organisations need to agree upon the types of toxicological end points that are sufficiently important to protect against (e.g. transient eye irritation, enzyme induction or other reversible effects). This is particularly true for sensory irritants. These conditions should also be taken into account when setting preventive measures, particularly when there are several irritants used at workplaces or when there are workers with a particular sensitivity or precondition. The short term exposure limits are used for substances for which short term peaks of exposure could result in serious health effects—for example, respiratory irritants such as chlorine. OELs for local effects to the skin do not exist. However, the general rule should be to limit skin exposure to irritants as much as possible.
The European Framework Directive on Safety and Health at Work 89/391/EEC requires that employers assess hazards and risks at the workplace and take measures to control exposure where needed. There are no specific regulations to the group of ‘‘irritants’’ as a whole. However, several EU Member States (e.g. Germany, Netherlands) have made specific regulations that cover the prevention of occupational skin disease, or the prevention of skin and airway disease in specific sectors, such as the hairdressing trade.
The European Framework Directive on Safety and Health at Work and the chemical agents directive prescribe a hierarchy of control measures. Preferably, measures to control exposure and to prevent health effects caused by substances should be taken at source. If that is not possible, one may take technical or organisational measures or, as a last resort, use personal protective equipment (PPE). Some examples that are specific to irritants are mentioned below.
Measures at source
Employers may try to eliminate the use of irritants, i.e. to make the use of irritants superfluous e.g. upholsterers may install carpets on stairs by means of double-sided tape and clamps instead of adhesives. Medical equipment may be sterilised by heating instead of using disinfectants. By means of careful process design and clean delivery of metal parts, manufacturers of various metal objects (e.g. inner walls or trailers) have been able to eliminate certain cleaning and degreasing steps form the process that involved manual handling of aggressive solvents.
One may also try to substitute irritants by less harmful substances. One example is the use of less volatile hardeners (amines) for epoxy resins, which will reduce inhalation. In the healthcare sector, the substitution of water and soap for hand cleaning by alcohol has been promoted, as the use alcohol has been shown to reduce the risk of contact dermatitis.
In some case, the supplier may adapt the form or packaging of the product. e.g., less dusty (coarser) hair-whitening powder, or a water-soluble packaging for powders that does not have to be opened. In cattle or poultry breeding, powder-formed feed may be substituted by pellets.
Finally, the process may be adapted. One may for instance cut glass wool insulation mats, instead of sawing them. This largely prevents the release of fibres. In road marking, thermoplastic materials may be sprayed, but also poured. Similarly, strong acids that are sometimes used in the cleaning of facades may be sprayed, brushed or poured. Careful emptying bags with e.g. wheat flour or other powder-like materials, and a reduced dropping-height, may largely reduce the formation of airborne dusts.
General ventilation and local exhaust ventilation (LEV) may be effective in case of airway irritants. Examples include spraying booths for (e.g.) isocyanate-containing coatings, soldering irons with integrated LEV on the tool, wood sanding machines with integrated LEV, and working tables with downdraft LEV for nail technicians.
If automation is not possible, specific tools and equipment may still reduce exposure, such as closed mixing vessels for 2-pack products, dispensers for volatile degreasing agents and spraying guns that reduce ‘overspray’ (e.g. High Volume Low Pressure or Air mix spray guns). In floor coating, rollers on a long stem may be used, in order to reduce both inhalation of vapours and dermal exposure.
When ‘wet work’ is common, job rotation may prevent skin disease, e.g. among hairdressers or nurses. Separation of certain activities, and restricted access, may reduce exposure as well. The hairdressing trade for example, has defined guidelines for the establishment of separated areas for mixing hair colourants etc.
In meat processing factories, cleaning the production facilities only starts after all other workers have left. Thus, no unprotected workers are exposed to the strong acid or lye cleaning agents, that are usually sprayed onto working surfaces.
Personal protective equipment (PPE)
PPE may only be used when other measures are not sufficiently effective or not possible. One may consult the SDS in order to select the proper PPE. In order to prevent inhalation of solid irritants, filtering facepieces may be sufficient in less demanding cases. Depending on the specific substance and process, more advanced options including full-face air-supplied respirators may be needed. The use of respirators may be too burdensome for workers that already suffer from asthma.
Regarding skin protection: consult the SDS in order to select proper gloves. In any case, leather, cotton and polyethylene gloves are generally not suitable, just like gloves that contain allergens, such as latex. Furthermore, remind the following:
- Consult the SDS or the product information of the glove, for the maximum time of use for the irritating substance(s) in question.
- Preferably, use disposable gloves and use them only once:
- Gloves may get contaminated inside when taking them of or putting them on;
- The skin may get contaminated when taking gloves off or putting them on.
- When the gloves are not used, hazardous substances will continue to penetrate through the glove, i.e. working breaks should be counted in the time of use.
- Never put on gloves when the hands or the gloves are wet or contaminated.
- Do not use moisture-tight gloves longer as necessarily needed; the hands may get wet as a result of perspiration within 10 minutes already, which may lead to contact dermatitis.
- Prevent the effect of moisture by perspiration by using cotton inner gloves.
It is advisable to use a skin care cream before work starts, every time after washing the hands, and after work. Draw up a skin protection plan, within the framework of the risk inventory and evaluation, which includes measures and instructions for:
- skin protection before work;
- skin cleansing during and after work;
- skin care after work.
In the skin protection plan, take into account:
- type of contamination, i.e. oily, greasy or strongly clinging such as lacquer, resins, adhesives;
- moist and wet working areas: metal working fluids, water, washing and cleansing solutions;
- skin protection when wearing gloves;
- protection from UV radiation when welding and working under strong sunlight.
Early detection of skin abnormalities or airway complaints may prevent the development of more severe complaints such as contact dermatitis, asthma or COPD. One may use:
- Standardised questionnaires or interviews;
- Clinical investigations of the airways (lung function tests) or the skin (by the occupational physician, dermatologist or lung specialist).
In order to facilitate early detection of skin disease, so-called ‘pictionnaire’ questionnaires have been developed, which use photos of affected skin.
After finding cases of skin or airway disease, the effectiveness of control measures in place should be evaluated again. Reporting schemes within the company – in addition to any reporting obligation to national occupational disease registries – may increase the companies’ capacity to trace defects in the risk management measures in place.
 CCOH – Canadian Centre for Occupational Safety and Health, ‘Scent-free policy for the workplace‘, 2011. Retrieved 30 August 2011, from: http://www.ccohs.ca/oshanswers/hsprograms/scent_free.html.
 COPD International (2004), Statistical Information. Retrieved 30 August 2011, from: http://www.copd-international.com/library/statistics.htm.
 Segre, L., ‘Human eye anatomy: parts of the eye‘, March 2011. Retrieved 08 September 2011, from: http://www.allaboutvision.com/resources/anatomy.htm
 EU-OSHA – European Agency for Safety and Health at Work, De Craecker, W., Roskams, N., Op de Beeck, R., ‘Occupational skin diseases and dermal exposures in the European Union (EU-25): policies and practice overview’, EU-OSHA, Bilbao, 2008. Available at: http://osha.europa.eu/en/publications/reports/TE7007049ENC_skin_diseases
 Chew, A. L. & H. I. Maibach, ‘Occupational issues of irritant contact dermatitis‘, Int. Arch. Occup. Environ. Health, vol. 76, 2003, pp. 339-346. Available at: https://springerlink3.metapress.com/content/38qtqkyw151wgvp9/resource-secured/?target=fulltext.pdf&sid=y5wz4pq3itoltxz1emhcb5me&sh=www.springerlink.com
 HSE – Health and Safety Executive, Skin at work website, 2011. Retrieved on 2011, from: http://www.hse.gov.uk/skin/
 Directive 1999/45/EC of the European Parliament and of the Council of 31 May 1999 concerning the approximation of the laws, regulations and administrative provisions of the Member States relating to the classification, packaging and labelling of dangerous preparations as modified, Official Journal of the European Communities, L 200/1, 30-07-1999. Available at: http://osha.europa.eu/en/legislation/directives/exposure-to-chemical-agents-and-chemical-safety/osh-related-aspects/59
 Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006, Official Journal of the European Union L 353/1 of 31 December 2008. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:353:0001:1355:EN:PDF
 HSE – Health and Safety Executive, ‘Causative agents‘, Skin at work website, 2011a. Retrieved on 2011, from: http://www.hse.gov.uk/skin/professional/causes/agentstable1.htm.
 COSHH-Essentials, Health and Safety Executive, United Kingdom. Available at: http://www.coshh-essentials.org.uk/about.asp
 BAuA – Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, ‘Einfaches Maßnahmen Konzept Gefahrstoffe (EMGK)‘, 2006. https://www.baua.de/EN/Topics/Work-design/Hazardous-substances/EMKG/Easy-to-use-workplace-control-scheme-EMKG_node.html
 Stoffenmanager, Ministry of Social Affairs and Employment, Netherlands. Available at: https://www.stoffenmanager.nl/default.aspx
 Council Directive of 12 June 1989 on the introduction of measures to encourage in the safety and health of workers at work (89/391/EC), Official Journal of the European Communities L 183/1, 29-06-1989 (European Framework Directive on Safety and Health at Work). Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:1989:183:0001:0008:EN:PDF.
 SafeHair, ‘Declaration of Dresden – Common health and safety development in professional hairdressing in Europe’, SafeHair, 28-09-2010. Retrieved 12 April 2011, from: http://www.safehair.eu/
 Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work, Official Journal of the European Communities L 131 of 5 May1998. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:1998:131:0011:0023:EN:PDF
 Coenraads P. J., Van der Walle, H., Thestrup-Pedersen, H., Rudzicka, T., Dreno, B., De La Loge, C., Viala, M., Querner, S., Brown, T., Zultak, M., ‘Construction and validation of a photographic guide for assessing severity of chronic hand dermatitis‘, British Journal of Dermatology, vol. 152, 2005, pp. 296-301. Available at: http://onlinelibrary.wiley.com/doi/10.1111/j.1365-2133.2004.06270.x/full.
 HSE – Health and Safety Executive, ‘Managing skin exposure risks at work‘, 2009. Available at: http://www.hse.gov.uk/pubns/priced/hsg262.pdf
 Spee, T., Duivenbooden, C. van, Terwoert, J., ’Epoxy resins in the construction industry’, Ann. N.Y. Acd. Sci., vol. 1076, 2006, pp. 429-438. Available at: http://onlinelibrary.wiley.com/doi/10.1196/annals.1371.010/pdf
 HSE – Health and Safety Executive, COSHH Essentials, ‘Control sheet SR11 – Hairdressing‘, 2006. Available at: http://www.hse.gov.uk/pubns/guidance/sr11.pdf
Bourke, J., Coulson, I., English, J., ‘Guidelines for the management of contact dermatitis: an update’, British Journal of Dermatology 160, 2009, pp. 946-954. Available at: http://onlinelibrary.wiley.com/doi/10.1111/j.1365-2133.2009.09106.x/abstract
Brown, T., ‘Strategies for prevention: occupational contact dermatitis‘, Occupational Medicine, vol. 54, 2004, pp. 450-457. Available at: http://occmed.oxfordjournals.org/content/54/7/450.full.pdf+html.
Chew, A. L. & Maibach, H. I., ‘Occupational issues of irritant contact dermatitis‘, 2006. Available at: https://springerlink3.metapress.com/content/g7821h783qv23434/resource-secured/?target=fulltext.pdf&sid=y5wz4pq3itoltxz1emhcb5me&sh=www.springerlink.com
Cullinan, P., ‘The prevention of occupational asthma‘, Eur. Respir. J., vol. 22, 2003, pp. 853-860. Available at: http://erj.ersjournals.com/content/22/5/853.full.pdf+html.
Diepgen, T. L., ’Occupational skin-disease data in Europe’, Int. Arch. Occup. Environ. Health, vol. 76, 2003, pp. 331-338. Available at: https://springerlink3.metapress.com/content/qeegjtpykpum3e2p/resource-secured/?target=fulltext.pdf&sid=y5wz4pq3itoltxz1emhcb5me&sh=www.springerlink.com
ECHA – European Chemicals Agency, Classification legislation webpage, Helsinki, Finland, available at: http://echa.europa.eu/legislation/classification_legislation_en.asp
EU-OSHA – European Agency for Safety and Health at Work, Brun, E., Flaspöler, E., Reinert, D., ‘Expert forecast on emerging chemical risks related to occupational safety and health‘, EU-OSH – European Agency for Safety and Health at Work, Bilbao, 2009. Available at: http://osha.europa.eu/en/publications/reports/TE3008390ENC_chemical_risks
EU-OSHA – European Agency for Safety and Health at Work, ‘Dangerous substances‘ in HORECA, E-FACTS-26, 2008. Available at: http://osha.europa.eu/en/publications/e-facts/efact26/view
EU-OSHA – European Agency for Safety and Health at Work, ‘Risk assessment for hairdressers’, E-FACTS-34, 2008. Available at: http://osha.europa.eu/en/publications/e-facts/efact34/view
EU-OSHA – European Agency for Safety and Health at Work, ‘Risk assessment for care workers, E-FACTS-35, 2008. Available at: http://osha.europa.eu/en/publications/e-facts/efact35/view
EU-OSHA – European Agency for Safety and Health at Work, ‘Respiratory sensitisers’, FACTS-39, 2003. Available at: http://osha.europa.eu/en/publications/factsheets/39
EU-OSHA – European Agency for Safety and Health at Work, ‘Skin sensitisers’, FACTS-40, 2003. Available at: http://osha.europa.eu/en/publications/factsheets/40
EU-OSHA – European Agency for Safety and Health at Work, ‘Cleaners and dangerous substances’, E-FACTS-41, 2008. Available at: http://osha.europa.eu/en/publications/e-facts/efact41/view
Gautrin, D., Newman-Taylor, A. J., Nordmann, H., Malo, J.-L., ‘Controversies in epidemiology of occupational asthma’, Eur. Respir. J., vol. 22, 2003, pp. 551-559. Available at: http://erj.ersjournals.com/content/22/3/551.full.pdf+html
Jungbauer, F. H. W., ’Wet work in relation to occupational dermatitis’, thesis Rijksuniversiteit Groningen, 2004. Available at: http://dissertations.ub.rug.nl/FILES/faculties/medicine/2004/f.h.w.jungbauer/thesis.pdf
Mapp, C. E., Boschetto, P., Maestrelli, P., Fabbri, L. M., ’Occupational Asthma – State of the Art’, Am. J. Respir. Crit. Care Med., vol. 172, 2005, pp. 280-305. Available at: http://ajrccm.atsjournals.org/cgi/reprint/172/3/280.
NCvB, Background document work related rhinitis (in Dutch), NCvB, 15-11-2010. Retrieved 08 September 2011, from: http://www.beroepsziekten.nl/datafiles/achtergrond-document-J001.pdf
Segre, L., ‘Human eye anatomy: parts of the eye‘, March 2011. Retrieved 08 September 2011, from: http://www.allaboutvision.com/resources/anatomy.htm
Thriel, C., Triebig, G., Bolt, H. M., ’Editorial: Evaluation of chemosensory effects due to occupational exposures’, Int. Arch. Occup. Environ. Health vol. 79, 2006, pp. 265-267. Available at: http://www.springerlink.com/content/7380773qm2476088/
TRGS 401 – ’Risks resulting from skin contact – determination, evaluation, measures’, Ausschuss für Gefahrstoffe, Bundesministerium für Arbeit und Soziales, Germany, 2006. Available at: http://www.baua.de/en/Topics-from-A-to-Z/Hazardous-Substances/TRGS/pdf/TRGS-401.pdf?__blob=publicationFile&v=4
TRGS 402 - ‘Identification and assessment of the risks from activities involving hazardous substances: inhalation exposure’ Committee on Hazardous substances, Bundesministerium für Arbeit und Soziales, Germany, 2010. Available at: http://www.baua.de/en/Topics-from-A-to-Z/Hazardous-Substances/TRGS/TRGS-402.html
TRGS 530 – ‘Hairdressing’ [in German], Bundesministerium für Arbeit und Soziales, 2007. Available at: http://www.baua.de/de/Themen-von-A-Z/Gefahrstoffe/TRGS/pdf/TRGS-530.pdf?__blob=publicationFile&v=3.
TRGS 430 – ‘Isocyanates – Risk assessment and control measures’ [in German], Bundesministerium für Arbeit und Soziales, 2009. Available at: http://www.baua.de/de/Themen-von-A-Z/Gefahrstoffe/TRGS/pdf/TRGS-430.pdf?__blob=publicationFile&v=3