Pereiti į pagrindinį turinį

Introduction

The construction industry forms an important part of the economies of all countries, employing a substantial workforce. It is also one of the most hazardous industries in the EU as well as in many other countries around the world. Major safety hazards for construction workers include working at heights, in excavations and tunnels, on highways and in confined spaces; exposure to electricity, construction machinery, etc.

Although in many countries big efforts have been done to improve safety performance, the construction sector continues to lag behind most other industries [1] [2]. Worldwide, construction workers are three times more likely to be killed and twice as likely to be injured as workers in other occupations. Altogether in Europe, every year more than 1,000 workers are killed and over 800,000 workers are injured [3].

Facts & figures

The construction sector in Europe

Construction is one of the largest economic sectors in all countries around the world. The building and construction industry accounts, on average, for 7-12% of a country’s employment and gross domestic product (GDP). According to the European Union's statistical unit, Eurostat [4], construction activities in the EU-27 provided in 2007 employment to an estimated 14.8 million persons. There were an estimated 3.1 million construction enterprises across the EU-27, which generated an estimated EUR 1,665 billion of turnover.

According to the statistical classification of economic activities in the EU, the construction industry covers NACE Section F (which is the same as NACE Division 45). [5] Based on this NACE classification, five subsectors, covering a different chronological stage of the construction process, are defined:

  • demolition and site preparation (NACE Group 45.1)
  • general construction activities (NACE Group 45.2)
  • installation work (NACE Group 45.3)
  • completion work (NACE Group 45.4)
  • renting of construction equipment (NACE Group 45.5).

The largest of these five construction subsectors in the EU-27, both in terms of employment and value added, is the building of complete constructions or parts thereof and civil engineering (NACE Group 45.2). Building installation (NACE Group 45.3) and building completion (NACE Group 45.4) are the next largest subsectors. The two smallest subsectors are site preparation (NACE Group 45.1) and the renting of construction or demolition equipment with an operator (NACE Group 45.5). [6]

The Council Directive 1992/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites (Construction Sites Directive 92/57/EEC) categorises 'construction work' into the following activities: excavation, earthworks, construction, assembly and disassembly of prefabricated elements, conversion or fitting-out, alterations, renovation, repairs, dismantling and demolition, upkeep, maintenance - painting and cleaning work, drainage. Construction work applies thus to work during the ‘whole-life cycle’ of a facility from its inception to its eventual demolition and any on-site recycling of its materials. [7]

With 3.1 million enterprises, an annual turnover of almost € 1,600 billion, a total direct workforce of almost 14 million, the construction sector contributes at about 10% to the GDP of the European Union. [8] Most construction enterprises serve a local market. Consequently, the construction sector is characterised by a high number of small enterprises, and relatively few large ones. The European construction sector is composed at about 99% of small and medium-sized enterprises (SMEs), who produce 80% of the construction industries output. The small enterprises (less than 50 employees) ensure 60% of the production and employ 70% of the sectors working population. [9]

Occupational safety

Apart from its economic relevance and importance, the sector is also responsible for about 20-30% of all known serious occupational injuries and, most probably, at least an equivalent share of occupational illnesses. [10] [11]

Poor construction safety and associated fatal and non-fatal occupational injuries have been reported in many studies from around the world. [12] It is however hard to obtain accurate figures due to unregistered employees and unregistered accidents. [13] According to Eurostat figures, more than one in four (26.1%) fatal accidents at work in the EU-27 in 2009 was recorded in the construction sector, while the manufacturing sector had the next highest share (16.1%) (Figure 1). [14] In the UK, the rate of fatal injury per 100,000 construction workers was 1.9 in 2012/2013 (compared with a five year average of 2.3). Although it accounts for only about 5% of the workers in the UK, it accounts for 27% of fatal accidents and 10% of reported serious accidents. [10] In the USA, the construction industry accounts for 11.1 deaths per 100,000 workers (compared with 4.2 deaths per 100,000 workers in all industries). [15]

Figure 1: Fatal and serious accidents at work by economic activity (EU-27, 2009) (% of serious and fatal accidents)

Figure 1
Source: [16]

According to the European Working Conditions Survey 2010 [17], workers in the construction sector feel that their health and safety is at risk. EWCS data show that 43.7% agrees with this statement and 41.2% feels that their health is negatively affected by their work. These percentages are much higher than for all sectors and also higher than for industry (Table 1).

Table 1: Health and well-being

  All Industry Construction NACE F
'Yes, My health and safety is at risk because of work.' 24,2 33,1 43,7
'Yes, My work affects my health negatively.' 25,0 33,5 41,2

Source: [18]

The majority of construction fatalities result from falls from heights and being struck by moving vehicles, whilst the majority of non-fatal injuries result from slips, trips and falls, and from being struck by a moving or falling object. [19] [20] [21] A Danish research study revealed that absence length of lost-time injuries was significantly dependent on the type of injury. Sprains and strains were most prevalent and accounted for approximately one third of injuries and absence. Fractures accounted for one sixth of injuries and the greatest proportion of long-term absence. [22]

Construction injuries have significant financial implications, to the individual, to the employer and to society. [23]. The European Agency for Occupational Safety and Health (EU-OSHA) [estimates that poor occupational health and safety standards in construction cost the EU and its taxpayers more than 75 billion euro each year. [24] Because the majority of the construction firms in Europe are SMEs, these businesses are most affected by construction accidents.

Safety hazards, risks and accidents

Major hazards and risks

The main hazards and risks of accidents in the construction sector can be categorised and described in the following way: [25]

  • risks of slips, trips and falls
  • risks related to instability
  • risks related to traffic
  • risks related to construction machinery
  • risks of drowning
  • risks related to electricity
  • risks related to gas
  • fire and explosion risks
  • asphyxia risks
  • risks related to (sub)contracting
  • risks related to green jobs.

Slips, trips and falls

The largest cause of accidents in all sectors, from heavy manufacturing through to office work, are slips, trips and falls. In the EU Member States they have been identified as the main causes of accidents that result in more than three days absence from work. Slips, trips and falls may have serious consequences, causing severe injuries such as broken bones or concussion. Key aspects of construction slips, trips and falls include uneven surfaces, obstacles, trailing cables, wet or slippery surfaces, and changes in level. Contractors and others in control of construction sites must therefore manage work so that people can move safely around the site.

Work at height

Falls from height are the main causes of fatal accidents in the construction industries of the EU Member States. [26] [27] The risks related to work at height may be subdivided in two groups: (1) those that may arise from the fall of workers, and (2) those that may arise from the fall of objects onto those working below.

These risks may arise at most construction sites. The consequences are generally more severe the greater the falling height. Falls generally occur from unguarded edges or openings at height, roof work, through fragile materials, into excavations, from ladders, from temporary platforms like tower scaffolds, from places of work on an existing facility and on stairways.

There is a need to assess the risk from work at height and to organise and plan the work so it is carried out safely. Managing work at height follows a hierarchy of controls - avoid, prevent, arrest - which begins with the question: 'Can the work be done safely from the ground?'. Fall restraints and safety netting should only be considered as a last resort if other safety equipment cannot be used. Comprehensive practical advice can be found in the non-binding guideline ‘How to choose the most appropriate work equipment for performing temporary work at a height’. [28]

Erecting and dismantling of scaffolding or any other similar equipment

Risks related to scaffolding may be subdivided in two groups: (1) those involved during the assembly, alteration and dismantling of the scaffolding; and (2) those related to the use of the scaffolding (e.g. risk of slipping). These risks can be present whenever scaffolds are used. Comparable risks arise when systems similar to scaffolding are used in falsework (i.e. temporary structures used in construction to support spanning or arched structures in order to hold the component in place until its construction is sufficiently advanced to support itself).

The incidents that occur are mainly caused by:

  • dangerous methods of erection or dismantling - where a safe system is not being followed;
  • defects in the erected scaffold - where the tower structure is incorrectly assembled or where a platform guardrail is missing;
  • misuse of the scaffold – where a ladder is used on a tower causing it to overturn or when a person falls while the tower is being moved.

Directive 2009/104/EC concerning the minimum safety and health requirements for the use of work equipment by workers at work [29] applies to scaffolds. Competent persons should draw up an assembly, use and dismantling plan. Standardised forms and documents can assist when checking scaffolds on a large project. Some small system scaffolds (e.g. small mobile tower scaffolds) can be safely erected following limited training and competence assessment provided strict controls are maintained.

Erection and dismantling: should use [30]

  • Advance guard rail system - where temporary guard rail units are locked in place from the level below and moved up to the platform level. They are in place before the operator accesses the platform to fit the permanent guardrails.
  • ‘Through-the-trap’ - involves the operator taking up a working position in the trap door of the platform, from where they can add or remove the components that act as the guardrails on the level above the platform. It is designed to ensure that the operator does not stand on an unguarded platform.

Stability: to maintain tower stability there is a need to make sure that: [31]

  • the tower is resting on firm, level ground with the locked castors or base plates properly supported. Never use bricks or building blocks to take the weight of any part of the tower;
  • stabilisers or outriggers are installed when required by the instruction manual; and
  • a tower is never erected to a height above that recommended by the manufacturer.

Using and moving: [32]

  • Never use a tower:
    • in strong winds;
    • as a support for ladders, trestles or other access equipment;
    • with broken or missing parts; or
    • with incompatible components.
  • When moving a tower you should always:
    • reduce the height to a maximum of 4m;
    • check that there are no power lines or other obstructions overhead;
    • check that the ground is firm, level and free from potholes; and
    • push or pull using manual effort from the base only.
    • Never move a tower while people or materials are on the tower, or in windy conditions.

Falls on the same level

Risks related to falls on the same level generally come about by tripping and slipping. They are likely to be more prevalent on untidy sites. [33]

Risks related to instability

Risk of injury may be created by falling objects from an upper level or from the collapse of structures, earthworks and equipment (e.g. cranes). Instability can adversely affect existing facilities at or nearby the project, new structures under construction and temporary structures erected as a part of the construction work. Loss of structural integrity can be due to a number of causes. These include failures in design especially of temporary works, failures in correctly executing the works as designed and failures in properly monitoring the work being undertaken to take account of the unforeseen. Complex excavations such as tunnels, shafts and deep excavations in urban areas require particular care: [34]

  • loose materials may fall from spoil heaps into the excavation;
  • excavations may undermine scaffold footings, buried services or the foundations of nearby buildings or walls;
  • the extra loadings of plant and vehicles can make the sides of excavations more likely to collapse.

Risks related to traffic

Risks related to working on existing roads with live traffic depend on the type of work to be performed. Collisions can occur between vehicles working inside the site, and between vehicles passing close to the site, or by passing vehicles with site machinery, equipment (e.g. scaffolds) and workers (perhaps where the site is not adequately signed and physically protected). Work in existing tunnels can present particular risks from and to moving traffic.

Things to consider when minimising vehicle movement: [35]

  • provide car and van parking for the workforce and visitors away from the work area;
  • control entry to the work area; and
  • plan storage areas so that delivery vehicles do not have to cross the site.

Risks to pedestrians from on-site traffic can be reduced by providing segregated pedestrian and vehicular routes that are properly demarcated and by providing added protection for pedestrians at places of particular risk. Crossing points require particular attention.

Things to consider when trying to keep pedestrians and vehicles apart: [36]

  • Entrances and exits - provide separate entry and exit gateways for pedestrians and vehicles;
  • Walkways - provide firm, level, well-drained pedestrian walkways that take a direct route where possible;
  • Crossings - where walkways cross roadways, provide a clearly signed and lit crossing point where drivers and pedestrians can see each other clearly;
  • Visibility - make sure drivers driving out onto public roads can see both ways along the footway before they move on to it;
  • Obstructions – do not block walkways so that pedestrians have to step onto the vehicle route; and
  • Barriers - think about installing a barrier between the roadway and walkway.

If vehicles reverse in areas where pedestrians cannot be excluded the risk is elevated and visibility becomes a vital consideration. Things to consider in relation to visibility: [37]

  • Aids for drivers - mirrors, CCTV cameras or reversing alarms that can help drivers can see movement all-round the vehicle;
  • Signallers - who can be appointed to control manoeuvres and who are trained in the task;
  • Lighting - so that drivers and pedestrians on shared routes can see each other easily. Lighting may be needed after sunset or in bad weather;
  • Clothing - pedestrians on site should wear high-visibility clothing.

Make sure that all drivers and pedestrians know and understand the routes and traffic rules on site. Use standard road signs where appropriate. [38] Directive 92/58/EEC provides additional requirements for the provision of safety and/or health signs. [39]

Risks related to construction machinery

Risks from construction machinery depend upon the type of equipment under consideration (e.g. earthmoving equipment, lifting equipment, etc.) and the work activities.

  • Risks related to earthmoving equipment (backhoes, loader shovel excavators, etc., including their accessories) may include: roll-over of the equipment, objects falling onto the equipment, and from malfunctioning safety and other warning devices, etc.
  • The risks related to lifting equipment (e.g. tower cranes, mobile cranes, etc., including accessories such as slings) may include: workers falling from height during the installation, operation and dismantling of the equipment, collapse of the equipment during use due to overloading or during erection and dismantling, and failures due to poor slinging techniques, etc. Demonstrable operator competence following training specific to the machinery, proper planning and supervision of the work, and effective inspection, maintenance and repair arrangements are some of the measures that can be taken to reduce the likelihood of accidents.

Directive 2009/104/EC concerning the minimum safety and health requirements for the use of work equipment by workers at work addresses these kinds of issues. [40]

Risks of drowning

Risks of drowning exist when crossing water to reach a place of work; working over or nearby water; working in confined spaces; falling into silos containing grain or fine powders; and performing underwater work such as underwater concreting. Even good swimmers are at risk of drowning if they are injured during falls. Chilling in cold waters and hazards from strong currents and dangerous vortices are typical causation factors in drowning incidents.

Risks related to electricity

The major risks related to fire or explosion fire or explosion.

Fire and explosion risks

Fire risks on a construction site have many sources such as:

  • the use of flammable liquids
  • welding or abrasive cutting techniques used in places not specially prepared for such works
  • liquid gases used with an open flame;
  • flammable and combustible materials (e.g. petroleum, timber and packaging).

Work in compressed air creates an increased risk of fire. Fire risks when working in confined spaces where escape may be difficult similarly requires careful consideration.

Explosive atmospheres can be present at construction sites because of the processes being undertaken by those carrying out the construction works and by others carrying out other industrial processes. Explosion risks can typically occur from:

  • the use of solvents and ignition by sparks;
  • static electricity (e.g. it might ignite blasting agents);
  • explosive atmospheres in sewers;
  • damage to pipes containing explosive gases; and
  • unexploded ordinance in the ground.

The Explosive Atmospheres Directive 1999/92/EC requires particular precautions to be taken. [43] Substitution of explosive materials as far as possible, good ground exploration and trained workers reduce the likelihood of explosions.

Asphyxia risks

Risks of asphyxiation (i.e. condition of severely deficient supply of oxygen to the body) exist in those places where either toxic gases are present or where gases have displaced oxygen leading to a non-respirable atmosphere. Sewer systems, including those designed to carry surface water, need to be checked before entering, as do other confined spaces. Acute intoxication by hydrogen sulphide (H2S) can lead to death as can oxygen deficiency. Fine dusts can also cause a risk of asphyxia.

Risks related to (sub)contracting

It is becoming more and more common for construction work to be the subcontracted. In common usage, a contractor is a person (natural or legal) who undertakes or manages construction works; a subcontractor is a person who undertakes or manages construction work assigned to them by a contractor. [44]

Most often this work is of a sporadic nature, which implies that workers are needed only temporarily. Specialised companies and their workers are hired to perform the work better, faster and usually more cheaply. So when employers hire contractors, these contractors in turn could hire subcontractors and a chain of companies emerges. The executed work often takes place mostly where the lead contractor is working. This has implications for the safety and health of the workers involved safety and health of the workers involved. [45] [46]

Risks related to green jobs

Green jobs can be understood as contributing, in some way, to the preservation or restoration of the environment. They can include jobs that help to protect ecosystems and biodiversity, or reduce consumption of energy and raw materials, or reduce waste and pollution. The new technologies or working processes associated with green jobs can lead to new hazards, which call for new combinations of skills to deal with them: the 'old' OSH knowledge cannot simply be transferred to them. Installing a solar water heater, for example, involves combining the skills of a roofer, a plumber and an electrician. [47]

Green construction jobs relate amongst others to the construction of 'green buildings' (i.e. structure that is environmentally responsible and resource-efficient throughout its life-cycle, from siting to design, construction, operation, maintenance, renovation, and demolition) and building retrofitting (insulation, heat retaining windows, ventilation with heat recovery, energy-efficient lighting), but also to the construction of, for example, wind turbines. In off shore wind farms the risks are multiplied many-fold, making them potentially highly dangerous worksites. With so many large turbines in ever-deeper water, ever further from a safe haven, access issues are the dominant OSH consideration. Working sites are more widely dispersed, with lower profit margins to pay for safety than in the oil and gas industries. Construction is hazardous and with the large numbers of turbines come skill shortages, as wind competes with other technologies for qualified staff. [1]

Causal influences in construction accidents

Construction accidents related to the abovementioned hazards and risks, will arise from a failure of different factors. One of the main problems with construction safety is, for example, that hazards in a construction site may change from day to day. In addition, many workers will go from site to site where they will be exposed to different hazards or where hazards are being managed differently.

Based on several accident studies, Haslam et al. [49] have proposed a model on the hierarchy of causal influences in construction accidents (Figure 2). According to the model, the following four interlinked factors give rise to the 'immediate accident circumstances':

  • worker and work team ('shaping factors': worker actions and behaviour, capabilities, communication, health, and available supervision);
  • workplace ('shaping factors': site conditions and layout, work environment, work scheduling, and housekeeping);
  • materials ('shaping factors': material suitability, usability, and condition);
  • equipment ('shaping factors': equipment suitability, usability, and condition).

These immediate causing factors of construction accidents, are influenced by some organisational, managerial and design factors (i.e. 'root causes'): construction design and processes, project management, risk management, client and economic influences, and safety culture, training and awareness. [50]

Figure 2: Hierarchy of causal influences in construction accidents

Figure 2
Source: [51]

Legal requirements

General

  • The general OSH Framework Directive [52] is applicable, as well as several of the individual Directives on the implementation of minimum safety and health requirements, addressing different types of risk exposures, including:
  • Council Directive 1992/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites [53]
  • Council Directive 1992/58/EEC of 24 June 1992 on the minimum requirements for the provision of safety and/or health signs at work [54]
  • Council Directive 1999/92/EC of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres [55]
  • Council Directive 2009/104/EC of 16 September 2009 concerning the minimum safety and health requirements for the use of work equipment by workers at work. [56]

Construction Sites Directive

The Council Directive 92/57/EEC of 24 June 1992 [57] - or shortly, the 'Construction Sites Directive' - lays down minimum safety and health requirements for 'temporary or mobile construction sites', i.e. any construction site at which building or civil engineering works are carried out and intends to prevent risks by establishing a chain of responsibility linking all the parties involved.

The Directive requests all responsible persons to establish a chain of responsibility linking all the parties involved, i.e. building owners, clients, contractors and sub-contractors. In specific cases the competent authorities have to be notified before work can start. The client or project supervisor nominates person(s) responsible for the coordination of health and safety at sites where several firms are present. A health and safety plan has to be drawn up.

For all Projects the directive requires to:

  • check competence and resources of those they appoint (e.g. designers or contractors);
  • allow sufficient time and resources for the work to be done safely;
  • provide key information to designers and contractors - it is for the clients to arrange for any gaps in information to be filled (e.g. commissioning an asbestos survey);
  • ensure that all those involved in the work co-operate and co-ordinate their activities;
  • establish a competent project team early on which fosters a culture of co-operation and integration;
  • ensure suitable management arrangements are in place.

Some construction works are notifiable under Directive 92/57/EEC. These are construction projects with a construction work lasting longer than 30 days or construction work involving 500 person days. The client will notify the competent authorities before the works starts. The notice must be displayed on the construction site. For notifiable projects the directive requires to:

  • appoint competent coordinator for health and safety;
  • provide coordinator with key information;
  • ensure the construction phase does not start unless there is health and safety plan in place.

Based on the need to reinforce the implementation of the Construction Sites Directive 92/57/EEC, addressed by the Community strategy 2007-2012 on health and safety at work [58] and the Commission communication on the practical implementation of the Health and Safety at Work Directives 92/57/EEC and 92/58/EEC [29], the European Commission recently published a non-binding good practice guide providing explanation, good practice suggestions and information for all stakeholders involved in construction projects. [59]

Prevention

Types of prevention measures

According to the model presented above (Figure 1), interventions for preventing or reducing construction injuries should focus on five main areas: (1) the workers and work teams, (2) the workplace, (3) the materials, (4) the equipment and (5) the organisation. These factors are often categorised into the following domains:

  • technical measures: engineering controls, personal protective equipment (safety helmets, safety harnesses, eye and respiratory protection, safety footwear), safety signs, maintenance, etc.
  • organisational measures: safety management systems, procedures, rules, etc.
  • personal/behavioural measures: awareness raising, safety training, hazard recognition, behavioural-based safety (BBS) programmes, toolbox meetings, etc.

The social environment of construction workers plays a crucial role in influencing safe behaviour, both positively and negatively. If a construction worker works in a crew or team where safety is positively evaluated he will behave accordingly. [60] Competent foremen (supervisors, frontline management) are in this regard the key to improving construction site safety. [61] [62] As construction workers have an informal and oral culture of risk, in which safety knowledge is understood without being openly expressed, it is of great importance that foremen lead by example, talk continually about safety, and listen to workers' concerns and build ownership and responsibilities [63].

Evidence of prevention measures

A literature review by [64] revealed that the vast majority of technical, human factors and organisational interventions have not been adequately evaluated. These authors state there is an urgent need to address this gap in the evidence base.

There was moderate evidence that regulatory interventions (i.e. related to the implementation of a vertical fall arrest standard [65] [66], and to a trench and excavation standard [67]) alone are not effective in preventing non-fatal and fatal injuries in the construction industry.

There appeared to be, on the other hand, limited evidence that a safety campaign can be effective in reducing non-fatal injuries in the construction industry. The concerning Danish campaign consisted of actions such as campaign mascots at the entrance of all construction sites, leaflets to new workers with the information on purpose of campaign and good practices; quarterly published newsletter with safety activities, accident cases causing injuries and preventive measures; results of the campaign on noticeboards; safety inspections of working environment, planning, training and housekeeping; financial incentive awarded to workers at the safest sites; themes on injury risks (for example, crane accidents) during working hours [68].

According to [69] the ‘frappez toujours’ approach (French for 'be persistent) may yield noticeable results: it does not really matter which initiative or intervention is adopted and its effectiveness is not an important point, as long as the topic of safety intervention buzzes around long enough, including gaining media attention results.

In general, it can be concluded that when various prevention measures are used in combination and these measures succeed in influencing social norms and public opinion, they are more effective than safety intervention targeting individuals only. [70]

Prevention throughout the different project phases

Construction engineering is a phased process. A large construction project consists generally of four project phases or stages: conceive, design, implement (construction) and operate. [71] Safety needs in this regard to be owned and integrated across the project team - from designers and engineers through the (sub)contractors and their workers [14].

The importance of attention for OSH in all stages or phases of a construction project is addressed in the Construction Sites Directive 92/57/EEC [72]. More specifically, the Directive mentions two principal stages: – the preparation phase, which includes inception, design, and preparation prior to commencing on site; – the execution or construction phase, which essentially involves construction work on site until the project is completed.

Safety in the preparation stage

The role of the design professional has traditionally been to design a building or structure. The safety of construction workers is partly left up to the contractors. However, design professionals can influence construction safety by making better choices in the design and planning stages of a project. Research shows that decisions concerning the design of projects have a major impact on site safety. Making better choices in the design stages can eliminate a considerable percentage of construction injuries. Figure 3 represents in this regard the ability to influence construction safety versus time (the project schedule). [8] [30] [36]

Figure 3: Ability to influence construction safety versus time

Figure 3
Source: based on [73] [74]

Designing for Construction Safety (DfCS) [75] is in this regard an important approach. DfCS is the process in which (civil) engineers and architects explicitly consider the safety of construction workers during the design process. Four specific trajectories can be identified that DfCS is likely to follow:

  1. increased prefabrication
  2. increased use of less hazardous materials and systems
  3. increased application of construction engineering
  4. increased spatial investigation and consideration.

This approach implies that design engineers will need to become better information gatherers and communicators on project-related information (e.g. communicating with prefabricators on the applicability and availability of prefabricated components). [76]

Safety in the execution phase

Safety during the construction stage is primarily the responsibility of the client and contractors (see Directive). According to the Construction Sites Directive 92/57/EEC [77], the client has the following obligations:

  • appointing project supervisors to assist them if they so wish;
  • sending a prior notice to the competent authority;
  • appointing one or more coordinators for safety and health matters when required;
  • ensuring that safety and health plans are drawn up when required; and
  • taking account of the general principles of prevention during design and preparation for a project, including the time that the work will require.

Conclusions

Construction is worldwide one of the most hazardous industries. And even though in many countries big efforts have been done to improve safety performance, the construction sector continues to lag behind most other industries. Construction should be stimulated to benchmark its safety practices and performances against other industries, and greater opportunity should be taken to learn from failures, with implementation of accident investigation procedures in order to reveal contributing factors earlier in the causal chain. [78] As the world has become smaller through technology and through cooperative, border-crossing arrangements, construction worker safety has become a concern that is shared worldwide. Because construction safety problems are very similar from country to country, they can be addressed and solved on a global scale. Solutions to safety problems in one country can, in this regard, readily be adopted in other countries to generate further improvements [79].

Literatūros sąrašas

[1] Hinze, J., 'Editorial - Construction safety', ''Safety Science'', 2008, 46, p. 565.

[2] Ringen, K., van Duivenbooden, J.C. & Melius, J., 'Constructon safety and health - Foreword', ''American Journal of Industrial Medicine'', 2010, 53, p. 551.

[3] EU-OSHA - European Agency for Safety and Health at Work, ''Building in Safety'', Luxembourg: Publications Office of the European Union, Magazine 7, 2004. Available at: https://osha.europa.eu/en/publications/magazine/7

[4] Eurostat (2013). Construction sector statistics. Retrieved 1 December 2013, from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Construction_statistics_-_NACE_Rev._1.1

[5] Eurostat (2013). Construction sector statistics. Retrieved 1 December 2013, from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Construction_statistics_-_NACE_Rev._1.1

[6] Eurostat (2013). Construction sector statistics. Retrieved 1 December 2013, from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Construction_statistics_-_NACE_Rev._1.1

[7] COM - Commission of the European Communities, ‘Non-binding guide to good practice for understanding and implementing Directive 92/57/EEC 'Construction sites', Luxembourg, Publications Office of the European Union, 2011. Available at: http://ec.europa.eu/social/BlobServlet?docId=6715&langId=en

[8] European Builders Federation, 'Enhancing social dialogue in construction SMEs (Press Release)', Brussels, 4 July 2013.

[9] European Builders Federation, 'Enhancing social dialogue in construction SMEs (Press Release)', Brussels, 4 July 2013.

[10] Hinze, J., 'Editorial - Construction safety', Safety Science, 2008, 46, p. 565.

[11] Ringen, K., van Duivenbooden, J.C. & Melius, J., 'Constructon safety and health - Foreword', ''American Journal of Industrial Medicine'', 2010, 53, p. 551.

[12] van der Molen, H., Lehtola, M.M., Lappalainen, J., Hoonakker, P.L.T., Hsiao, H., Haslam, R.A., Hale, A.R., Verbeek, J.H., 'Interventions for preventing injuries in the construction industry', Cochrane Database of Systematic Reviews, 2007, Issue 4. Available in English at: http://www.cochrane.org/

[13] Spangenberg, S., 'An injury risk model for large construction projects', ''Risk Management'', 2009, 11, 111-134. Available at: http://www.palgrave-journals.com/rm/journal/v11/n2/full/rm20095a.html

[14] Eurostat (2013). Health and safety at work statistics. Retrieved 1 February 2014, from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Health_and_safety_at_work_statistics

[15] CPWR - Center for the Protection of Workers’ Rights, ‘The Construction Chart Book: The U.S. Construction Industry and Its Workers’, Washington D.C, The Center for Construction, Research, and Training, 2007

[16] Eurostat (2013). Health and safety at work statistics. Retrieved 1 February 2014, from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Health_and_safety_at_work_statistics

[17] EWCS - European Working Conditions Survey (2010). Survey mapping tool and data set on construction sector. Retrieved 1 December 2013, from: http://www.eurofound.europa.eu/surveys/smt/ewcs/results.htm

[18] EWCS - European Working Conditions Survey (2010). Survey mapping tool and data set on construction sector. Retrieved 1 December 2013, from: http://www.eurofound.europa.eu/surveys/smt/ewcs/results.htm

[19] van der Molen, H., Lehtola, M.M., Lappalainen, J., Hoonakker, P.L.T., Hsiao, H., Haslam, R.A., Hale, A.R., Verbeek, J.H., 'Interventions for preventing injuries in the construction industry', Cochrane Database of Systematic Reviews, 2007, Issue 4. Available in English at: http://www.cochrane.org/

[20] Derr, J., Forst, L., Chen, H.Y., Conroy, L. ‘Fatal falls in the US construction industry, 1990 to 1999’, Journal of Occupational and Environmental Medicine, 2001, 43, 10, 853-860

[21] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[22] Kines, P., Spangenberg, S., Dryreborg, J., 'Prioritizing occupational injury prevention in the construction industry: Injury severity or absence?', ''Journal of Safety Research'', 2007, 38, 53-58.

[23] van der Molen, H., Lehtola, M.M., Lappalainen, J., Hoonakker, P.L.T., Hsiao, H., Haslam, R.A., Hale, A.R., Verbeek, J.H., 'Interventions for preventing injuries in the construction industry', Cochrane Database of Systematic Reviews, 2007, Issue 4. Available in English at: http://www.cochrane.org/

[24] EU-OSHA - European Agency for Safety and Health at Wapork, 'Building in Safety'', Luxembourg: Publications Office of the European Union, Magazine 7, 2004. Available at: https://osha.europa.eu/en/publications/magazine/7

[25] COM - Commission of the European Communities, ‘Non-binding guide to good practice for understanding and implementing Directive 92/57/EEC 'Construction sites', Luxembourg, Publications Office of the European Union, 2011. Available at: http://ec.europa.eu/social/BlobServlet?docId=6715&langId=en

[26] van der Molen, H., Lehtola, M.M., Lappalainen, J., Hoonakker, P.L.T., Hsiao, H., Haslam, R.A., Hale, A.R., Verbeek, J.H., 'Interventions for preventing injuries in the construction industry', Cochrane Database of Systematic Reviews, 2007, Issue 4. Available in English at: http://www.cochrane.org/

[27] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[28] COM - Commission of the European Communities, ‘Non-binding guide to good practice for implementing Directive 2001/45/EC (Work at a height)’, Luxembourg, Publications Office of the European Union, 2007. Available at: http://ec.europa.eu/social/main.jsp?catId=738&langId=en&pubId=140&type=2&furtherPubs=yes

[29] EC - European Council, 'Council Directive 92/58/EEC of 24 June 1992 on the minimum requirements for the provision of safety and/or health signs at work’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31992L0058:EN:HTML

[30] HSE - Health and Safety Executive, Tower scaffolds. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/scaffold.htm

[31] HSE - Health and Safety Executive, Tower scaffolds. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/scaffold.htm

[32] HSE - Health and Safety Executive, Tower scaffolds. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/scaffold.htm

[33] Lipscomb, H.J., Glazner, J.E., Bondy, J., Guarini, K., Lezotte, D., 'Injuries from slips and trips in construction', ''Applied Ergonomics'', 2006, 37, 3, 267-274.

[34] HSE - Health and Safety Executive, Structural stability during excavations. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/excavations.htm

[35] HSE - Health and Safety Executive, Traffic management on site. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/vehiclestrafficmanagement.htm#keeping

[36] HSE - Health and Safety Executive, Traffic management on site. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/vehiclestrafficmanagement.htm#keeping

[37] HSE - Health and Safety Executive, Traffic management on site. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/vehiclestrafficmanagement.htm#keeping

[38] HSE - Health and Safety Executive, Traffic management on site. Retrieved 1 February 2014, from: http://www.hse.gov.uk/construction/safetytopics/vehiclestrafficmanagement.htm#keeping

[39] EC - European Council, 'Council Directive 92/58/EEC of 24 June 1992 on the minimum requirements for the provision of safety and/or health signs at work’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31992L0058:EN:HTML

[40] EC - European Council, 'Council Directive 2009/104/EC of 16 September 2009 concerning the minimum safety and health requirements for the use of work equipment by workers at work’, Official Journal, 2009. Available at: https://osha.europa.eu/en/legislation/directives/workplaces-equipment-signs-personal-protective-equipment/osh-directives/3

[41] Janicak, C., 'Occupational fatalities due to electrocutions in the construction industry', ''Journal of Safety Research'', 2008, 39, pp. 617-621.

[42] Chi, C.-F., Yang, C.-C., Chen, Z.-L., ‘In-depth accident analysis of electrical fatalities in the construction industry’, ''International Journal of Industrial Ergonomics'', 2009, 39, 635-644

[43] EC - European Council, 'Council Directive 1999/92/EC of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres’, Official Journal L 23, 1999. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31999L0092:en:NOT

[44] COM - Commission of the European Communities, ‘Non-binding guide to good practice for understanding and implementing Directive 92/57/EEC 'Construction sites', Luxembourg, Publications Office of the European Union, 2011. Available at: http://ec.europa.eu/social/BlobServlet?docId=6715&langId=en

[45] EU-OSHA - European Agency for Safety and Health at Work, 'Promoting occupational safety and health through the supply chain', Luxembourg: Publications Office of the European Union, 2012. Available at: https://osha.europa.eu/en/publications/literature_reviews/promoting-occupational-safety-and-health-through-the-supply-chain/view

[46] Walters, D. & James, P., ‘Understanding the role of supply chains in influencing health and safety at work’, Leicester, IOSH - Institution of Occupational Safety and Health, 2009.

[47] EU-OSHA - European Agency for Safety and Health at Work (2013). Green jobs. Retrieved 1 December 2013, from: https://osha.europa.eu/en/topics/green-jobs

[48] EU-OSHA - European Agency for Safety and Health at Work, 'Green jobs and occupational safety and health: Foresight on new and emerging risks associated with new technologies by 2020 - Summary', Luxembourg: Publications Office of the European Union, 2013. Available at: https://osha.europa.eu/en/publications/reports/summary-green-jobs-and-occupational-safety-and-health-foresight-on-new-and-emerging-risks-associated-with-new-technologies-by-2020

[49] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[50] Hale, A., Walker, D., Walters, N., Bolt, H., 'Developing the understanding of underlying causes of construction fatal accidents', ''Safety Science'', 2012, 50, 2020-2027.

[51] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[52] EC - European Council, ‘Council Directive 89/391/EEC of 12 June 1989 on the introduction of measures to encourage improvements in the safety and health of workers at work (Framework Directive)’, Official Journal L 183, 29/06/1989, 1989, pp. 0001-0008. Available at: https://osha.europa.eu/en/legislation/directives/the-osh-framework-directive

[53] EC - European Council, 'Council Directive 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:01992L0057-20070627:EN:NOT

[54] EC - European Council, 'Council Directive 92/58/EEC of 24 June 1992 on the minimum requirements for the provision of safety and/or health signs at work’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31992L0058:EN:HTML

[55] EC - European Council, 'Council Directive 1999/92/EC of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres’, Official Journal L 23, 1999. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31999L0092:en:NOT

[56] EC - European Council, 'Council Directive 2009/104/EC of 16 September 2009 concerning the minimum safety and health requirements for the use of work equipment by workers at work’, Official Journal, 2009. Available at: https://osha.europa.eu/en/legislation/directives/workplaces-equipment-signs-personal-protective-equipment/osh-directives/3

[57] EC - European Council, 'Council Directive 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:01992L0057-20070627:EN:NOT

[58] COM - Commission of the European Communities, ‘Improving quality and productivity at work: Community strategy 2007-2012 on health and safety at work’, Brussels, 2007. Available at: http://eur-lex.europa.eu/LexUriServ/site/en/com/2007/com2007_0062en01.pdf

[59] COM - Commission of the European Communities, ‘Non-binding guide to good practice for understanding and implementing Directive 92/57/EEC 'Construction sites', Luxembourg, Publications Office of the European Union, 2011. Available at: http://ec.europa.eu/social/BlobServlet?docId=6715&langId=en

[60] Swuste, P., Frijters, A. & Guldenmund, F., 'Is it possible to influence safety in the building sector? A literature review extending from 1980 until the present', Safety Science, 2012, 50, 1333-1343.

[61] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[62] Lees, H. & Austin, J., 'The case for behaviour-based safety in construction', ''Management, Procurement and Law'', 2011, 164, 1, 3-8

[63] Kines, P., Andersen L.P.S., Spangenberg, S., Mikkelsen, K.L., Dryreborg, J., Zohar, D., 'Improving construction site safety through leader-based verbal safety communication', Journal of Safety Research, 2010, 41, 309-406

[64] van der Molen, H., Lehtola, M.M., Lappalainen, J., Hoonakker, P.L.T., Hsiao, H., Haslam, R.A., Hale, A.R., Verbeek, J.H., 'Interventions for preventing injuries in the construction industry', Cochrane Database of Systematic Reviews, 2007, Issue 4. Available in English at: http://www.cochrane.org/

[65] Derr, J., Forst, L., Chen, H.Y., Conroy, L. ‘Fatal falls in the US construction industry, 1990 to 1999’, Journal of Occupational and Environmental Medicine, 2001, 43, 10, 853-860

[66] Lipscomb HJ, Li L, Dement J., 'Work-related falls among union carpenters in Washington State before and after the Vertical Fall Arrest Standard', ''American Journal of Industrial Medicine'', 2003, 44, 157-165.

[67] Suruda A, Whitaker B, Bloswick D, Philips P, Sesek R., 'Impact of the OSHA trench and excavation standard on fatal injury in the construction industry', ''Journal of Occupational and Environmental Medicine'' 2002, 44, 1x0, 902-905.

[68] Spangenberg S, Mikkelsen KL, Kines P, Dyreborg J, Baarts C. 'The construction of the Oresund link between Denmark and Sweden: the effect of a multifaceted safety campaign', ''Safety Science'', 2002, 40, 457-465.

[69] Swuste, P., Frijters, A. & Guldenmund, F., 'Is it possible to influence safety in the building sector? A literature review extending from 1980 until the present', Safety Science, 2012, 50, 1333-1343.

[70] Spangenberg, S., 'An injury risk model for large construction projects', ''Risk Management'', 2009, 11, 111-134. Available at: http://www.palgrave-journals.com/rm/journal/v11/n2/full/rm20095a.html

[71] Spangenberg, S., 'An injury risk model for large construction projects', Risk Management, 2009, 11, 111-134. Available at: http://www.palgrave-journals.com/rm/journal/v11/n2/full/rm20095a.html

[72] EC - European Council, 'Council Directive 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:01992L0057-20070627:EN:NOT

[73] Spangenberg, S., 'An injury risk model for large construction projects', Risk Management, 2009, 11, 111-134. Available at: http://www.palgrave-journals.com/rm/journal/v11/n2/full/rm20095a.html

[74] Swuste, P., Frijters, A. & Guldenmund, F., 'Is it possible to influence safety in the building sector? A literature review extending from 1980 until the present', Safety Science, 2012, 50, 1333-1343.

[75] DfCS - Design for Construction Safety. Retrieved 1 December 2013, from: http://www.designforconstructionsafety.org/

[76] Toole,T.M. and Gambatese, J., 'The Future of Designing for Construction Safety', 2006. Available at: http://www.designforconstructionsafety.org/Link%20Images/P75%20Future%20of%20DfCS%20toole%20and%20gambatese.doc

[77] EC - European Council, 'Council Directive 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites’, Official Journal L 245, 1992. Available at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:01992L0057-20070627:EN:NOT

[78] Haslam, R.A., Hide, S.A., Gibb, A.G., Gyi, D.E., Pavitt, T., Atkinson, S., Duff, A.R., 'Contributing factors in construction accidents', Applied Ergonomics, 2005, 36, 4, 401-415.

[79] Hinze, J., 'Editorial - Construction safety', Safety Science, 2008, 46, p. 565.

Papildoma literatūra

EU-OSHA publications

  • EU-OSHA - European Agency for Safety and Health at Work, 'Report - Prevention of risks in construction in practice', Luxembourg: Office for Official Publications of the European Communities, 2004, 64 pp. Available at: https://osha.europa.eu/en/publications/reports/108/view.
  • EU-OSHA - European Agency for Safety and Health at Work, ‘Building in Safety’, Magazine 7, Luxembourg: Office for Official Publications of the European Communities, 2004, pp. 16-18. Available at: https://osha.europa.eu/en/publications/magazine/7.
  • EU-OSHA - European Agency for Safety and Health at Work, ‘Systems and Programmes - Achieving better safety and health in construction', Information report, Luxembourg: Office for Official Publications of the European Communities, 2004. Available at: http://osha.europa.eu/en/publications/reports/314.
  • EU-OSHA - European Agency for Safety and Health at Work, 'Forum 14 - Effectiveness of economic incentives to improve occupational safety and health', Luxembourg: Office for Official Publications of the European Communities, 2005. Available at: http://osha.europa.eu/en/publications/forum/14/view.

Other interesting publications

  • COM - Commission of the European Communities, ‘Non-binding guide to good practice for understanding and implementing Directive 92/57/EEC 'Construction sites', Luxembourg, Publications Office of the European Union, 2011. Available at: http://ec.europa.eu/social/BlobServlet?docId=6715&langId=en

Websites related to OSH in the construction sector

  • CPWR - The Center for Construction Research and Training (no date). Home page. Retrieved on 14 February 2014, from: http://www.cpwr.com/
  • ELCOSH - Electronic Library of Construction Occupational Safety and Health (no date). Home page. Retrieved on 14 February 2014, from: http://www.elcosh.org/
Bendraautorius

Richard Graveling

Klaus Kuhl

Lieven Eeckelaert

Prevent, Belgium